How much weight can pallet rack hold?

There is no single number. Beam capacity is rated per pair, per level, and frame capacity depends on upright height and the vertical spacing between beam levels. We size beams and frames from your heaviest pallet, and the rated capacities go on load plaques posted on the system.

How wide do the aisles between rack rows have to be?

As wide as your forklift needs to turn and place a pallet: roughly 12 to 13 feet for counterbalance, 8 to 10 feet for reach trucks, and 5 to 6 feet for very-narrow-aisle trucks. We confirm it against your truck's specs before drawing the rows.

What type of pallet rack do I need?

For mixed SKUs, selective (teardrop) rack is the default because every pallet is reachable. Pushback stores 2 to 6 deep per SKU, last in first out; pallet flow suits FIFO and dated stock; drive-in handles bulk storage of a few SKUs; cantilever holds long loads; and carton flow serves case picking.

How much does pallet rack cost in Spring Hill?

There is no honest per-bay price until we know your layout. Cost depends on the number of pallet positions, frame height, beam capacity, decking, freight and installation. Send your pallet size, heaviest load per level, clear height and building size, and we return a free CAD layout with an itemized quote.

Cantilever Rack warehouse storage system

Spring Hill, Tennessee

Cantilever Rack in Spring Hill, TN

Name: Nashville Pallet Racks
Address: 1161 Murfreesboro Pike, Nashville, TN, 37217, US
Telephone: (615) 703-6869
Price range: $$

Long tooling stock, tube, and fabrication material needs arm support that matches bundle weight and length. For a manufacturing-support warehouse balancing scheduled consumption with arriving reserve loads, cantilever rack in Spring Hill starts with that operating problem rather than a catalog capacity. Long loads need support at the right intervals, with an open front for handling. Bundle length, stiffness, weight, and the equipment placing it decide the arms and column spacing, not a standard pallet footprint.

Saturn Parkway and US-31 connect Spring Hill’s manufacturing base and supplier activity with I-65 and the wider Middle Tennessee freight network. Material needed for the next delivery window must remain reachable while larger reserves are stored behind it. Send the stock profile, load sizes, building dimensions, and handling equipment you use. We can compare the available storage choices and explain the space and access tradeoffs before a layout is approved. Arm count must follow how the load behaves between supports, not simply the number of columns that fit along a wall.

(615) 703-6869

Why Spring Hill Warehouses Work With Us

Long tooling stock, tube, and fabrication material needs arm support that matches bundle weight and length. Around Saturn Parkway and US-31, that situation calls for a layout comparison tied to your own stock and building. Long loads need support at the right intervals, with an open front for handling. Bundle length, stiffness, weight, and the equipment placing it decide the arms and column spacing, not a standard pallet footprint. We start with your drawings, inventory records, and photographs, so the conversation stays focused on the building and loads you actually have.

Compare wall-side and double-sided runs with the actual load lengths and handling route. Leave enough approach room for a long bundle to turn. The comparison should show what you gain, what access you give up, and where staging remains available. Keep round or loose stock contained with suitable arm details, and confirm capacity per arm as well as the column and base. A longer bundle can change both support spacing and the handling approach even when its total weight is unchanged.

You work through the design and itemized scope with one contact at Nashville Pallet Racks, a division of Warehouse Equipment & Supplies Co. We explain component choices, confirm the proposed load ratings, and agree delivery and installation responsibilities before you order. If the product is not a fit, the alternative belongs in the discussion, not after the rack arrives. Call (615) 703-6869 to review the plan and any phasing needs.

Free warehouse consultation

CAD layout with position counts

Rack installation planning and coordination

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Operations We Rack Around Here

Local freight and industrial connections include Saturn Parkway, US-31, I-65.

Automotive Suppliers

Manufacturing

Metal Fabrication

Plastics

Industrial Supply

Packaging

Distribution Centers

Third-Party Logistics

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the floor. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

Cantilever specification starts and ends with the load. We collect bundle dimensions, weight per bundle, and how material is handled - forklift forks, a side loader, or by hand off a cart - because that determines arm length, arm capacity, and how much clearance each level needs.

From there we set column height and spacing, choose straight or inclined arms, and decide whether lips are needed to keep round stock from rolling. Single-sided runs get positioned along a wall; double-sided runs get aisle dimensions matched to whatever's moving material in and out.

The quote itemizes columns, bases, arms, bracing, and anchors, with a CAD drawing showing the run, arm levels, and rated capacities per arm. Installation partners anchor bases, plumb columns, brace the run, and set arm elevations to the drawing.

The result is arms you can reposition as inventory changes, capacity ratings for every level, and the floor space that long material used to occupy.

For a Spring Hill project, the drawing also needs to show where incoming loads wait, how your team replenishes active stock, and which areas must remain accessible during installation. We agree the material staging and work zones with you before deliveries are scheduled. Compare the quoted capacity with your peak inventory, not just an average week; a layout that leaves no room for a seasonal receipt may put pallets back on the floor. You receive a component list and configuration-specific load ratings, with any reuse or replacement assumptions identified. Changes to loads, beam elevations, or handling equipment should be reviewed before the system is reconfigured.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (615) 703-6869

Recent Pallet Rack Projects

A look at warehouse racking systems our team has installed.

Warehouse pallet racks with wire decking

Installed pallet rack system in a warehouse

Industrial warehouse racking installation

Pallet rack systems installed in a warehouse

View More Projects

Get a Cantilever Rack Quote for Your Spring Hill Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (615) 703-6869.

Nashville Pallet Racks

1161 Murfreesboro Pike

Ste 110 #230

Nashville, TN 37217

(615) 703-6869

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Nashville Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.