Serving the Greater Nashville Area
    Cantilever Rack warehouse storage system
    Nashville, Tennessee

    Cantilever Rack in Nashville, TN

    Cantilever rack in Nashville, TN fills a real need in Metro Center, the Trinity Lane and Cowan Street area and the Sidco Drive district off I-65, where supply houses store pipe, lumber and steel.

    Many of these are older 18 to 24 foot buildings. Long stock on open arms recovers floor that has been lost to piles.

    The same open-front design works for steel studs, conduit and trim, so one run can serve several product families in a busy supply house.

    (615) 703-6869

    Why Long Goods Need Cantilever Racking

    A pallet bay is limited by its posts. Anything longer than the bay hangs into the aisle or gets left on the floor.

    Cantilever arms reach from one column, so loads of any length slide on from the front.

    Cantilever warehouse racking holding steel tubing
    Cantilever rack storing lumber and wood products

    Central Nashville Buildings and Tight Floors

    Metro Center and the Airport / Elm Hill Pike area have plenty of older shells with close column spacing. Towers often sit between columns along a wall.

    Single-sided runs make good use of walls. A double-sided island works where the floor is wide enough for aisles on both faces.

    Short drives to job sites across the I-40, I-24 and I-65 interchange mean fast turns. Layout keeps popular lengths near the door.

    Cantilever Rack for Lumber and Building Products in Nashville

    Building material distributors around Metro Center and Sidco Drive carry framing lumber, trim, siding and steel studs. Each has different weight and depth.

    Lumber sits well on flat arms. Steel studs and track are light but long, so they need arm spacing that keeps them from bending.

    Sheet goods like plywood and drywall need arms long enough for their depth. Decking across the arms helps with thinner panels.

    Busy contractor counters near Trinity Lane and Cowan Street turn orders quickly. Grouping by trade, framing in one run and finish in another, keeps loaders moving.

    A roofed outdoor run can hold rougher material while indoor towers protect finish goods from humidity.

    Arm Length and Cantilever Storage Rack Capacity

    Arm length tracks load depth. Capacity drops as arms get longer, so we avoid oversized arms that cost capacity and money.

    Weight per bundle and its position on the arm set the rating needed. Heavier items go low.

    Phasing Installation in a Working Building

    Few central Nashville supply houses can shut down for an install. We plan the run in sections so part of the floor keeps working.

    Material moves to the first finished towers, which frees space for the next section.

    A phased plan agreed in advance keeps the counter open and the trucks loading while steel goes up.

    We agree each phase's start and finish areas with you ahead of delivery, so material and crews are never in each other's way.

    Aisles and Truck Choice

    Counterbalance trucks need room to pivot with long loads. Side-loaders carry material along the aisle, which shrinks the width needed.

    Older buildings rarely have extra room, so truck choice can decide how many towers fit.

    Summer heat in unconditioned buildings shapes the install schedule; we plan early starts and staging away from will-call.

    Getting Your Nashville Layout

    Share item lengths, weights and clear height with a rough floor plan, and we price the job line by line on a scaled drawing.

    Our parent company is Warehouse Equipment & Supplies Co., in the rack supply and installation business since 1997.

    Pallet inventory can go into drive-in rack in Nashville or pallet flow rack in Nashville. See the cantilever rack page and the Nashville service area page.

    Call (615) 703-6869

    Recent Pallet Rack Projects

    A look at warehouse racking systems our team has installed.

    Carton flow pallet rack installation
    Drive-in pallet rack installation
    Installed industrial pallet racks
    Warehouse pallet racks with wire decking
    Installed pallet rack system in a warehouse
    Industrial warehouse racking installation
    Pallet rack systems installed in a warehouse
    Warehouse racking project
    Installed cantilever racking
    Installed push back pallet rack system

    Get a Cantilever Rack Quote for Your Nashville Warehouse

    Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (615) 703-6869.

    Nashville Pallet Racks

    1161 Murfreesboro Pike

    Ste 110 #230

    Nashville, TN 37217

    (615) 703-6869

    Monday - Friday: 8:00 AM - 6:00 PM

    We respect your privacy. Your information will never be shared.

    Cantilever Rack Questions From Nashville Buyers

    Nearby Areas We Also Serve

    Our delivery and installation territory covers Middle Tennessee, so one team can handle multiple buildings for the same company.

    Where We Work

    Located in Nashville, we serve the entire Greater Nashville region with industrial pallet racks and warehouse storage solutions.

    Nashville Pallet Racks

    Address

    1161 Murfreesboro Pike
    Ste 110 #230
    Nashville, TN 37217

    Business Hours

    Monday - Friday: 8:00 AM - 6:00 PM
    Saturday: Closed
    Sunday: Closed

    Need Cantilever Rack in Nashville?

    Call (615) 703-6869 or request a quote and we will get a layout started.

    (615) 703-6869
    Tap to Call