Serving the Greater Nashville Area
    Cantilever Rack warehouse storage system
    La Vergne, Tennessee

    Cantilever Rack in La Vergne, TN

    Cantilever rack in La Vergne, TN usually goes into a corner of a large I-24 distribution building where long goods have been stuck on the floor between pallet rows.

    La Vergne's tilt-wall buildings often reach 32 to 40 feet clear. That height can hold tall towers, though your trucks decide how much of it you use.

    (615) 703-6869

    Long Goods Inside a Big-Box Building

    3PLs and retail distributors in La Vergne sometimes take on accounts with furniture rails, fencing, rolled goods or building products. Pallet bays cannot hold them cleanly.

    A dedicated cantilever racking zone keeps those items from blocking pallet aisles and gives each account its own lane.

    Cantilever warehouse racking holding steel tubing
    Cantilever rack storing lumber and wood products

    Height, Reach and Arm Spacing

    Reach trucks built for pallet aisles may not handle long loads well. Many sites bring in a side-loader or multidirectional truck for this zone.

    We plan level spacing from the bundle height plus fork clearance, then stop at the level your truck can place safely.

    Upper arms often hold lighter items so heavy loads stay closer to the floor.

    Receiving Mixed Freight in a 3PL

    A 3PL may receive long goods mixed into regular pallet loads. Sorting happens at the dock, so the cantilever zone should be a short trip from there.

    Mark which doors feed the zone so receiving staff route long items correctly from the start.

    Choosing a Cantilever Storage Rack Layout

    Double-sided towers suit the open floor in a big building. A single-sided run can line a wall that is otherwise unused.

    We position the zone near the doors that receive long freight, so it does not cross pallet traffic.

    Reconfiguring Cantilever Racking for New Accounts

    3PL contracts change. Bolt-on arms can move up or down the column as new loads arrive.

    Before reconfiguring, check the new load against the arm and column ratings on your drawing. We can review changes with you.

    Pallet accounts in the same building may suit drive-in rack in La Vergne for deep blocks or pallet flow rack in La Vergne for date rotation.

    Safety Habits Around a Cantilever Rack Zone

    Long loads swing. A twenty-foot bundle turning in an aisle sweeps a wide path, so foot traffic should stay out of the cantilever zone during moves.

    Painted walkways and signage at the zone entrance help in a busy 3PL building where temporary staff rotate through.

    Post the arm and column ratings at the end of each run. Drivers and supervisors can check a new load against them before it goes up.

    Never climb arms to reach material. Use the lift truck or a proper platform.

    Large La Vergne buildings in the I-24 Southeast submarket near the Smyrna line often run around the clock. Inspections fit best at shift change, when the zone is quiet and someone can walk every tower.

    Starting a La Vergne Quote

    Send the item list with lengths and weights, the truck you will use and the zone dimensions. You get a scaled layout and a price for every component.

    La Vergne work is handled by a division of Warehouse Equipment & Supplies Co., a supplier and installer of rack since 1997.

    Summer installs in large unconditioned buildings go better with early starts. Find specifications on the cantilever rack page and local details on the La Vergne service area page.

    Call (615) 703-6869

    Recent Pallet Rack Projects

    A look at warehouse racking systems our team has installed.

    Carton flow pallet rack installation
    Drive-in pallet rack installation
    Installed industrial pallet racks
    Warehouse pallet racks with wire decking
    Installed pallet rack system in a warehouse
    Industrial warehouse racking installation
    Pallet rack systems installed in a warehouse
    Warehouse racking project
    Installed cantilever racking
    Installed push back pallet rack system

    Get a Cantilever Rack Quote for Your La Vergne Warehouse

    Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (615) 703-6869.

    Nashville Pallet Racks

    1161 Murfreesboro Pike

    Ste 110 #230

    Nashville, TN 37217

    (615) 703-6869

    Monday - Friday: 8:00 AM - 6:00 PM

    We respect your privacy. Your information will never be shared.

    Cantilever Rack Questions From La Vergne Buyers

    Nearby Areas We Also Serve

    Our delivery and installation territory covers Middle Tennessee, so one team can handle multiple buildings for the same company.

    Where We Work

    Located in Nashville, we serve the entire Greater Nashville region with industrial pallet racks and warehouse storage solutions.

    Nashville Pallet Racks

    Address

    1161 Murfreesboro Pike
    Ste 110 #230
    Nashville, TN 37217

    Business Hours

    Monday - Friday: 8:00 AM - 6:00 PM
    Saturday: Closed
    Sunday: Closed

    Need Cantilever Rack in La Vergne?

    Call (615) 703-6869 or request a quote and we will get a layout started.

    (615) 703-6869
    Tap to Call