Serving the Greater Nashville Area
    Pushback Rack warehouse storage system
    Antioch, Tennessee

    Pushback Rack in Antioch, TN

    Pushback rack in Antioch, TN usually goes into buildings that were never tall to begin with, so the gain has to come from depth instead of height. Many of the older parks off Bell Road and Murfreesboro Pike sit in the 18 to 24 foot clear range. When you cannot stack higher, closing aisles is where the pallet positions are hiding.

    Inside every lane, a set of carts telescopes along sloped steel rails. Load from the front, and the next pallet nudges the first one back. Pull the front load, and whatever sits behind it rolls up to the face by gravity.

    (615) 703-6869

    Where Pushback Rack Earns Its Keep in Antioch

    Low clear height changes the math. With only three or four beam levels available, every aisle you remove is worth more than it would be in a 36 foot building. Swapping two selective rows and their aisle for a four-deep bay often recovers a meaningful block of floor.

    The catch is access. Pushback pallet rack is last in, first out, so it suits SKUs where five or more pallets sit at once and rotation by date does not matter. Consumer goods, packaging and building supplies headed into Nashville along I-24 tend to fit that profile.

    Fast single-pallet SKUs still belong in selective positions. We usually keep a selective face near the dock and push the deeper lanes toward the back wall.

    High-density pushback rack lanes loaded with pallets
    Pushback pallet racking showing cart rails and load beams

    Sizing Lanes to Your Pallet Counts

    A six-deep lane holding two pallets wastes four slots and forces your driver to dig. We sort your stock list by pallets per SKU before choosing between two, three, four or five deep.

    Uprights get rated for the combined weight of loads plus the cart assembly. The rails add their own load to the structure, and the front beam takes impact every time a forklift sets a pallet down.

    If you are comparing options, look at our drive-in rack in Antioch for very deep single-SKU blocks, or pallet flow rack in Antioch when product must leave in the order it arrived.

    Fitting Push Back Racking Into an Older Antioch Building

    Older buildings bring column spacing that rarely lines up with a fresh layout. We draw the column grid first, then fit lane widths around it so bays do not straddle a column line.

    If you already run selective rack, some of those uprights may carry over into the new bays once we check depth, capacity and condition. The quote lists which pieces stay and which are new.

    Summer heat inside non-air-conditioned Antioch shells is real. Heavy assembly happens early in the day, with bundles parked away from outbound doors.

    Keeping Antioch Lanes Clean and Moving

    Rows only stay smooth when drivers set loads square and gently. A short walkthrough with your forklift operators on day one prevents most cart hang-ups we see later in the life of the system.

    Getting a Pushback Rack Quote

    Send a sketch showing columns and dock doors, plus clear height, load dimensions, weights and how many pallets each item carries. Photos of your lift truck data plate help too.

    Back comes a scaled drawing and a line-by-line price. Our company operates under Warehouse Equipment & Supplies Co., a rack supplier and installer going back to 1997. Read the product basics on our pushback rack page or see everything we offer on the Antioch service area page.

    Call (615) 703-6869

    Recent Pallet Rack Projects

    A look at warehouse racking systems our team has installed.

    Carton flow pallet rack installation
    Drive-in pallet rack installation
    Installed industrial pallet racks
    Warehouse pallet racks with wire decking
    Installed pallet rack system in a warehouse
    Industrial warehouse racking installation
    Pallet rack systems installed in a warehouse
    Warehouse racking project
    Installed cantilever racking
    Installed push back pallet rack system

    Get a Pushback Rack Quote for Your Antioch Warehouse

    Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (615) 703-6869.

    Nashville Pallet Racks

    1161 Murfreesboro Pike

    Ste 110 #230

    Nashville, TN 37217

    (615) 703-6869

    Monday - Friday: 8:00 AM - 6:00 PM

    We respect your privacy. Your information will never be shared.

    Pushback Rack Questions From Antioch Buyers

    Nearby Areas We Also Serve

    Our delivery and installation territory covers Middle Tennessee, so one team can handle multiple buildings for the same company.

    Where We Work

    Located in Nashville, we serve the entire Greater Nashville region with industrial pallet racks and warehouse storage solutions.

    Nashville Pallet Racks

    Address

    1161 Murfreesboro Pike
    Ste 110 #230
    Nashville, TN 37217

    Business Hours

    Monday - Friday: 8:00 AM - 6:00 PM
    Saturday: Closed
    Sunday: Closed

    Need Pushback Rack in Antioch?

    Call (615) 703-6869 or request a quote and we will get a layout started.

    (615) 703-6869
    Tap to Call